Last Updated: May 26, 2021
Cleaning your swimming pool is a unending job that has to be accomplished frequently. The cleaner works by suction similar to an everyday vacuum cleaner, however as an alternative of sucking in air, it sucks in water. A strainer catches all of the particles and the water is recirculated. Now after which, the suction will turn out to be too sturdy and the cleaner will get caught to the underside of your swimming pool.
How can you retain that from taking place? Read on.
If you’re utilizing an Automatic Pool Cleaner
The 2 Steps:
Pool Cleaners cleaners may be very difficult. Often you gained’t know there’s an issue till you come again to the pool after it has been operating for a number of hours by itself, solely to uncover the pool hasn’t been cleaned in any respect as a result of the cleaner is caught in a single place. You don’t have any direct management over the cleaner head throughout its operation, so that you’ll have to discover another resolution:
- We suggest that you simply begin out by looking out on Google if there are different folks with the identical pool cleaner mannequin that had the identical downside. It’s not unlikely that you simply’ll come upon YouTube movies the place they present how they fastened their downside or discussion board discussions the place yow will discover a repair by studying feedback
- If technique 1 didn’t work, you’ll be able to hold studying this text or ask the producer for recommendation.
In order to forestall the cleaner from getting caught within the first place, you’ll have to alter the suction by controlling the water circulate by way of it. The stronger the water circulate, the extra seemingly it’s to get caught in a single place. You want some suction although or the pool gained’t get cleaned correctly. The best resolution is a circulate keeper valve.
Here’s an instance of what a flowkeeper valve seems to be like:
A flowkeeper valve is a valve that regulates the circulate of water by way of the hose going to the cleaner. It can’t connect immediately to the skimmer on the aspect of the pool so that you’ll want a further, quick piece of hose.
The quick hose attaches to the skimmer port. You then connect the flowkeeper valve to it and the longer hose to the opposite finish of the flowkeeper valve. The different finish of the lengthy hose attaches to the cleaner.
The flowkeeper valve has a spring loaded valve that may be set to open and shut so it sucks in some water on the valve, thus lowering the quantity of water being sucked in by way of the cleaner. This reduces the quantity of suction on the cleaner head and prevents it from getting caught. The flowkeeper valve can be utilized on a handbook cleaner as properly, notably should you’re utilizing a protracted, telescoping rod.
Above-ground swimming pools don’t have a predominant drain on the underside of the pool, however in-ground swimming pools do. This is one other space the place automated cleaners are susceptible to get caught. The predominant drain has suction pulling water by way of it and the cleaner has its personal suction. When they arrive in touch, the mixed suction can lure the cleaner.
The best, and least costly, resolution to this downside is to flip off the primary drain whereas your automated cleaner is working. Alternately you’ll be able to alter the primary drain stress by finding the controls on the pump. The predominant drain ought to have a lever on the pipe permitting you to shut it completely, or partially shut it which can scale back the suction.
The drain will nonetheless work whether or not the cleaner is working or not, and when you’ve discovered the right setting that forestalls your cleaner from getting caught when it goes over it, you’ll be able to go away it there. You’ll most likely have to experiment with it slightly since all swimming pools and pumps are totally different, however when you’ve discovered the right setting, your work is completed.
If You’re Using a Manual Pool Cleaner:
If you’re utilizing a handbook cleaner you’ve acquired an excessive amount of management over the cleaner head, particularly should you’re within the water utilizing a brief pole. You can really feel when the cleaner is making an attempt to stick to the underside of the pool and alter the way in which you’re holding the pole and positioning the pinnacle second by second as you progress it alongside. You can alter the angle at which the pinnacle contacts the underside of the pool, holding one fringe of it simply barely off the underside to forestall the suction from getting it caught.
If you’re standing on the deck utilizing a protracted pole although, it could possibly get a bit trickier. Long telescoping poles have a deplorable tendency to bend, bow, and flex uncontrollably whenever you’re pushing the cleaner or making an attempt to sweep it side-to-side throughout the pool. Under these circumstances, it’s almost not possible to tilt the pinnacle the way in which you’ll be able to with a brief pole. If the suction is simply too sturdy, pushing the cleaner with a protracted pole nearly ensures it would get caught. Pulling the cleaner with a protracted pole isn’t as problematic, however it’s nonetheless difficult. You simply don’t have the management you will have with a brief pole.
News from the weblog: